The following specifications should be used in for the proper application of the SUNLIFE Roofing System™. Failure to properly follow the specifications will jeopardize the quality of the installation leading to warranty problems in the future. Shortcuts to save labor time now will cost you warranty time, materials, and labor later.

SMOOTH SURFACE SPECIFICATIONS:

1. Clean area thoroughly.


2. Repair all visible defects, splits, blisters, etc.


3. Apply base coat Elastic Roof Sealer at a rate of 5 - 7 gallons per square.


4. Embed flexible mat into wet material. NOTE; Some wrinkling may occur when the mat is broomed into the wet material; however, this in no way affects the waterproofing characteristics of the system.


5. Apply first coat SUNLIFE Roofing Compound at a rate of 2 gallons per square.


6. Apply second coat SUNLIFE Roofing Compound at a rate of 2 gallons per square. NOTE: Some light staining may occur through the film. This is normal, and has no adverse effects to the system.

|Built-up| |Metal| |Singleply| |Universal| |Wet| |US Applicators| |Warranty|

This site is best viewed with Netscape Navigator 4.7 or Microsoft Explorer 4.5

  Sunlife Systems International, Inc.
5301 Nations Crossing Road
Charlotte, NC 28217
(800) 328-5885
Tel: (704) 527-2480
Fax: (704) 527-0534

© 2006 Sunlife Systems International, Inc.

All rights reserved.

Do not duplicate or redistribute in any form.